Ürünler
Ürünler
Hassas ve dayanıklı sinterlenmiş karbür kesici takımlarımız, yenilikçi bir takım
çözümü için işte tam istediğiniz şeydir.
PARMAK FREZELER
Super Endmill For HRSA
• Aerospace and generator industries - Endmill for parts such as engines and turbines made into hard-to-cut materials.

• Optimal endmill for Ni Based super alloy HRSA; Inconel718, Hastelloy, Waspaloy and etc.

Özellik
• Aerospace and generator industries: Exclusive endmill for HRSA and machining parts of engine and turbine
• Irregular flute spacing and helix angle design: Reducing chattering and improving stability in machining
• High rigidity core web design: Improving chip evacuation and stability in machining
• Sharp cutting edge: Reducing cutting load and work hardening
• Excellent tool life: New grade with excellent wear resistance coating and high toughness substrate

Super Endmill For HRSA

 

HRSA, a material with higher strength at high temperature and corrosion resistance than general alloy, is commonly used for aerospace engine and parts of generator turbine.

 

HRSA is divided into Ni Based, Ni-Fe Based, and Co Based heat resistant super alloy by elements and Ni Based heat resistant super alloy such as Inconel718, Hastelloy, Waspaloy and etc. is most generally used.

 

HRSA is a representative of hard-to-cut materials causing short tool life due to work hardening, low thermal conductivity and high-temperature strength.

 

Low thermal conductivity makes increasing cutting speed impossible due to generating high temperature while machining at the edge.
Maintaining high strength at high temperature and work hardening also cause rapid wear, breakage, and severe damage on the edge of cutting tools.

 

KORLOY launches Super Endmill, the most effective tool for hard-to-cut material in HRSA machining.

 

Super Endmill increases machinability and stability in machining due to positive rake angle and irregular flute spacing shape.

 

In addition, Super Endmill ensures excellent tool life preventing fracture on cutting edge and increasing wear resistance in machining due to high toughness carbide substrate and new coating with high temperature hardness and oxidation resistance.

Avantajlar

ㆍIncreased machining stability
- Irregular flute spacing and helix angle design increase machining stability.
- Unique core design with good chip evacuation and high rigidit

ㆍIncreased tool life
- Applied high toughness substrate and new coating with good wear resistance and oxidation resistance

이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용한 무단으로 수집되는 것을 거부하며,
이를 위반 시 정보통신망법에 의해 형사처벌 됨을 유념하시기 바랍니다.
게시일 : 2018년 2월 26일