Products
Products
Our precise and durable carbide cutting tools are just
what you’ve wanted for an innovative tooling solution.
GRADE
UPC810 · UPC845
• Applied Super Toughness substrate with excellent resistance to chipping and breakage, specialized for machining of hard-to-cut materials • High-performance Ultra-PVD coated grade providing stable tool life when it comes to machining of HRSA

Feature
• Super Toughness substrate design
- Applying Super Toughness substrate design which strengthens WC-Co binding, and improves resistance to chipping and breakage and ensures stability when it comes to machining of hard-to-cut materials

• High-performance Ultra-PVD coated grade
- Provide stable tool life by preventing any unexpected tool breakage due to application of the new Ultra-PVD coating
- Increased chip evacuation due to high-hardness and highly lubricative coating

UPC810 · UPC845

 

Materials like Inconel (Inconel, Waspaloy, Rene), Titanium alloy, and HRSA (Heat Resistance Alloy) can be used at high temperatures from 700℃ to 1000℃. Due to its characteristics, it is commonly used in the aerospace industry. This HRSA features exceptional resistance to heat and corrosion, and great pull out strength. However, it has been categorized as a difficult-to-cut material because it imposes a severe strain on tools in the machining process. Workpieces, which are used in the electricity generating industry and oil & gas industry, are also considered as hard-to-cut materials.

 

These hard-to-cut materials cause work hardening and have low heat conductivity. Because of poor heat evacuation, they also affect tools and frequently result in shorter tool life due to chipping, build-up edge, and unexpected tool breakage. In order to provide a solution for HRSA machining, KORLOY has released the new Ultra Coating grades with improved resistance to welding, chipping and wear – UNC/UPC grade.  

 

UPC810 is a S10 grade for turning, applying PVD coating. Compared to existing products and UNC805 products, it is a high toughness grade optimized for high-feed and high-interruption machining conditions.

 

UPC845 is a S45 grade for milling, applying PVD coating. Compared to existing products and UNC840 products, it is a high toughness grade that can be applied in various uses such as high-feed, high-interruption, slotting, ramping, and pocket machining.

Advantages

ㆍSuper Toughness substrate design
- Maximized resistance to chipping and breakage

ㆍApplied high-performance Ultra-PVD Coating
- Provide stable tool life while preventing any unexpected tool breakage

ㆍExclusive grade optimized for machining of hard-to-cut materials

이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용한 무단으로 수집되는 것을 거부하며,
이를 위반 시 정보통신망법에 의해 형사처벌 됨을 유념하시기 바랍니다.
게시일 : 2018년 2월 26일